Skip to content
Steering Rack Stops: Drift Lock Without Breaking Parts

Steering Rack Stops: Drift Lock Without Breaking Parts

If you've ever felt the steering wheel hit a hard stop at full lock and heard the power steering pump start to whine, you know the feeling of maxing out your car's steering geometry. For drift drivers running fat tire combos and race drivers chasing the limit, that feeling happens fast—and it costs money. Tie-rods bend, brake ducts rub, sway bars catch frame. The steering geometry you thought was dialed in creates chaos the moment you commit to full lock. That's where the Universal Steering Rack Stop Set (Lock Limiters) changes everything. These aren't just bumpers; they're precision control tools that let you dial maximum steering angle without breaking parts or grinding sheet metal.

Why Steering Angle Limiters Matter for Drift and Race Cars

Stock cars come with factory steering stops that cap out around 24–35 degrees of steering angle. That's fine for parking lots and highway on-ramps, but drift and race drivers need more. Run a wide wheel and tire combo with aggressive offset, and suddenly your factory geometry doesn't work anymore. Wide rims push the tire and wheel further into the wheel well, shrinking clearance at full lock. Add a coilover drop, and frame or sway bar contact becomes unavoidable. Many drivers solve this by cutting or welding factory stops, but that's permanent and messy. Rack stops offer reversible control: clip them on, test, dial in clearance, and move on to the track with confidence.

The real danger isn't rubbing—it's what happens to your steering internals when you hit full lock under load. Imagine you're at full steering angle on a tight autocross cone or banking into a drift, and you hit a bump. The rack shaft is already at its limit; the power steering pump doesn't know that. It keeps pressurizing fluid into a solid mechanical stop. That hydraulic shock gets transmitted straight into the tie-rod connection, bending or stripping threads on expensive components. A well-placed rack stop absorbs that travel smoothly before the pump reaches maximum pressure, protecting your steering system from catastrophic failure.

Professional racers and drift drivers who've swapped in aftermarket steering kits or angle kits know that controlling maximum lock is non-negotiable. An angle kit might give you steering input quickening (more wheel angle per steering wheel rotation), but it doesn't control how far the rack physically travels. Rack stops work with angle kits to let you maximize steering responsiveness while protecting the steering geometry. That combination is why the Universal Steering Rack Stop Set (Lock Limiters) is considered an essential upgrade by SLR customers running competitive setups.

How Steering Rack Stops Work and Why Shaft-Mounted Design Matters

Unlike factory stops that are welded or pressed into the rack housing or tied to the inner tie-rod, shaft-mounted stops clip directly onto the steering rack shaft itself. The shaft is the cylindrical rod inside the rack that moves left and right as you turn the wheel. By mounting stops on the shaft, they move with the steering input and create a positive mechanical end-of-travel that's consistent and repeatable. When the rack shaft tries to move past the stop, it simply can't—no flex, no binding, just a solid mechanical halt.

The SLRspeed design uses individual clips that slide onto the rack shaft. You add them one at a time, moving the stops slightly in or out along the shaft to adjust where the lock occurs. This incremental approach is powerful because it gives you fine control without removing the inner tie-rod or cutting factory stops. Most drivers need between 2 and 6 stops depending on their wheel fitment and desired angle limit. Start with one or two, test full lock in a safe space, check for rubbing, and add more if needed. Once you've dialed it in, the setup stays consistent across multiple track days or events.

The shaft-mounted approach also protects your power steering system. Factory tie-rod stops force the rack to stop abruptly at the tie-rod itself, meaning pump pressure concentrates at that joint. Rack-mounted stops stop the shaft upstream, allowing the pump to release pressure gradually as the rack decelerates. Over time, this reduces heat buildup in the steering fluid and extends the life of seals and internal components. For drivers pushing their cars hard—especially in drift events where full lock is held for extended periods—this protection adds up to real reliability gains.

Fitment, Compatibility, and Vehicle Coverage

The Universal Steering Rack Stop Set fits any steering rack with an outer shaft diameter of 25–30mm. This range covers the vast majority of popular drift and race platforms. Nissan's entire lineup is supported: S13, S14, S15, 350Z, 370Z, R32, R33, R34, and newer generations. BMW drivers get coverage across the generations they care about most: E30, E36, E46, E90, E92, and newer models including M3 variants, Z3, and Z4. Toyota platforms include the Supra (all generations), GT86, MR2, and Celica variants. Mazda's legendary drift platforms are in—RX-7 FD and FC, MX-5 Miata NA, NB, NC, and ND. Subaru's WRX, STI, and BRZ family all fit. Corvette owners running C5 and C6 models gain steering angle control without aftermarket steering kits. Cadillac XLR, Lexus IS and SC, and a broad range of other Japanese performance platforms are compatible.

What's less commonly known is that SLRspeed bundles the Universal Steering Rack Stop Set into their complete steering angle kits. If you're buying a full custom steering solution, these stops often come included. But if you've already got a steering kit from another vendor or you want to retrofit stops onto your current setup, buying them separately gives you flexibility. The set includes 8 individual stops, which is typically enough to handle a complete steering geometry overhaul plus spares.

Compatibility isn't just about fitment; it's about geometry. A rack stop that works for a Nissan S14 might not work the same way for a BMW E36 because the steering arms, tie-rod angles, and brake duct positions are different. SLRspeed designs these stops to function across a wide range of chassis without modification because the shaft diameter and stop mechanism are universal. However, the actual number of stops you need and their positioning will vary by car. A Corvette C6 running 18-inch wheels with moderate offset might only need 1–2 stops, while a wide-body S14 with 17-inch wheels at +5 offset might need 4–5 stops to clear everything cleanly.

Solving Frame Rub, Sway Bar Contact, and Brake Duct Interference

One of the most frustrating problems in drift and race car builds is frame rubbing at full steering lock. You've dialed in your suspension, installed a wide wheel and tire combo, and everything feels good until you hit full lock and hear that awful scraping sound. The tire and rim assembly rotates further than the frame allows, or the sway bar end-link jams against the lower control arm. Brake ducts, which sit right next to the steering rack on many platforms, get interference from steering components moving at full angle.

Traditional fixes are ugly: cut frame material, bash the sway bar, grind the brake duct bracket. These solutions work but sacrifice structural integrity or brake cooling. Steering rack stops offer a cleaner path. By limiting the steering rack's travel before the wheel assembly reaches the rub point, stops prevent contact entirely. The trade-off is that you lose a few degrees of steering angle, but if those few degrees weren't usable anyway because of rub, you're not giving up anything real. What you gain is a car that doesn't destroy itself and brakes that stay cool.

The process is straightforward. Install one or two stops, turn the wheel to full lock in both directions, and inspect for interference with frame, sway bar, or brake components. If rubbing still occurs, add another stop on each side to reduce travel further. Test again. Repeat until clearance is clean. Most drivers nail it within 3-4 incremental adjustments. The beauty here is that stops are clip-on; if you later swap wheel fitment or lower the car further, you adjust or reposition stops without permanent modification to the steering system.

Protecting Tie-Rods and Steering Components from Shock Loads

Tie-rods are engineered to handle normal steering loads—the kind of forces generated by highway driving and moderate cornering. What they're not engineered for is the sudden shock of a steering system hitting a hard stop while traveling at speed over rough terrain. Imagine hitting full lock during a drift maneuver and then rolling over a curb or imperfection in the track surface. The suspension compresses, the wheel turns up into the wheel well, and the tie-rod suddenly takes all that impact load at the same instant the steering is maxed out. That's when tie-rods crack, threads strip, and ball joints fail.

Rack-mounted stops mitigate this by limiting travel before the factory stops (or the tie-rod itself) becomes the final end-of-travel point. The stops work like mechanical shock absorbers for steering, spreading the deceleration of the rack shaft over a controlled distance rather than letting it hit a wall. The power steering pump also benefits; instead of pressurizing fluid straight into a solid block until relief valve cuts in, the pump encounters back-pressure gradually as the rack approaches its limit. This reduces instantaneous shock loads in the hydraulic system, protecting seals, hoses, and internal pump components.

For track drivers pushing 10+ hours of seat time in a day, those incremental durability gains add up. A tie-rod that would normally need replacement after one season lasts two seasons. A power steering pump that would struggle with heat after extended full-lock drifting stays cooler and more reliable. These aren't huge individual improvements, but they compound into fewer failures, shorter downtime, and lower maintenance budgets over the life of a race car or drift platform.

Adjustability and Fine-Tuning Your Steering Angle

Stock steering stops are binary: installed or not. Custom-welded stops are permanent. Rack stops give you continuous adjustment. The Universal Steering Rack Stop Set includes 8 stops, and you deploy them one or two at a time based on your needs. Want to start conservatively with 45 degrees of steering angle? Clip on one stop each side. Need 60 degrees to make a specific drift line work? Add another. Testing a new wheel fitment and want to see exactly where rub occurs? Drop to half your stops, note where contact starts, then re-add stops incrementally until it clears. This trial-and-error process is fast and repeatable because you're not cutting anything; you're just sliding clips on and off a shaft.

This adjustability also matters across different track configurations. A tight autocross course with sharp, slow-speed corners benefits from maximum steering angle—maybe you want 65+ degrees. A high-speed road course where steering inputs are smaller might be safer and faster at 45 degrees because it gives you stiffer, more direct steering response. Rather than changing rack stops between events, many drivers install enough stops to hit their maximum desired angle, then accept that they have that full range available. Once at the track, they can run at whatever angle they want up to that limit.

Precision in positioning matters too. If you've got 1mm of frame clearance at full lock, installing stops 2mm further on the shaft than you calculated means you'll have rubbing. Conversely, installing them 2mm earlier means you're leaving 4mm of unused travel. SLRspeed's design accommodates this by allowing stops to slide smoothly along the shaft so you can fine-tune their position after installation. Some drivers use permanent marker to mark ideal stop positions once they've confirmed clearance, making reinstall repeatable if stops ever need removal and reinstall.

Installation Without Removing Tie-Rods or Cutting Factory Stops

The biggest advantage of shaft-mounted rack stops is that they require zero permanent modification to your steering system. You don't remove inner tie-rods, you don't cut factory stops, you don't weld anything. You raise the car, access the rack shaft, and clip stops on. A competent DIYer with basic hand tools can do this in under an hour. Professional shops can handle it in 15 minutes during a suspension service.

Because nothing is cut or welded, you can always revert to original geometry if needed. Sell the car and the new owner wants stock steering? Remove the stops and you're back to factory. Swap steering kits and the new kit needs different stops? The old stops come off without a trace. This reversibility makes rack stops ideal for people who build drift and race cars as semi-permanent projects, moving platforms between vehicles or configurations as budgets and interests change.

Installation does assume you have safe access to the steering rack. On most modern performance cars, you'll need to remove the driver's side front wheel and possibly the inner fender liner to reach the rack shaft comfortably. Some cars require removing the steering column or tie-rod end to clear space. Consult your vehicle's service manual or reach out to SLRspeed's tech support team (561-877-3229) if you're unsure about access on your specific platform. They can walk you through fitment and installation best practices for your car.

Why Rack Stops Matter for Competitive Drifting

Drift drivers have different steering geometry requirements than road racers. A Formula Drift car running a 6-hour endurance race needs steering angle, but a qualifier running a 60-second timed run needs it even more desperately. The course designers know this; they throw esses, transitions, and clipping zones that reward aggressive steering inputs and maximum steering angle. Drivers who can carry steering angle through a section without losing momentum or running wide have a time advantage. The limiting factor is often not the steering system itself but the physical geometry of the car: does it rub? Does the steering feel responsive or sloppy?

Rack stops solve this by letting drivers confidently run maximum angle without worrying that the next bump or landing will destroy their steering. A drift car at full lock for 30+ seconds of a long entry has enormous loads on steering components. Proper stops mean you're protecting your investment while pushing the car's dynamic potential. Many podium-finishing drift teams run rack stops as part of their base setup because the reliability gain translates to confidence, and confidence translates to better driving.

The complementary upgrade is an aftermarket steering angle kit or quick-steer kit (like the Corvette models benefit from). These angle kits change the steering ratio, multiplying steering input so you get more wheel angle from less steering wheel rotation. Combined with rack stops that control maximum travel, angle kits let you run extremely aggressive steering geometry on a tight turning radius. That's why you see drift cars with 65–74 degree steering angles; they're running angle kits, wide offset wheels, and rack stops in concert.

Manufacturing Quality and USA Production

The Universal Steering Rack Stop Set (Lock Limiters) is manufactured in the USA by SLRspeed. That's a significant point because it means the tolerances, material quality, and design refinement are consistent. Each clip is precision-machined to fit snugly on 25–30mm diameter shafts without slop or rattle. The material is high-strength aluminum and steel, chosen to resist deformation under the pressure loads of full steering lock and power steering force.

Contrast this with generic stop clips sold by parts warehouses or imported directly from overseas. Those stops often fit loosely on the shaft, migrate during driving, or deform after a few aggressive track days. SLRspeed's approach is to engineer stops that work consistently across thousands of miles and hundreds of hours of driving. This reliability matters because a failed or migrated stop doesn't just reduce steering angle—it can jam the steering rack mid-corner, which is dangerous.

Because these stops are engineered and manufactured to precision standards, they're also reusable and repositionable without wear. You can slide them on and off repeatedly without stripping the shaft or damaging the clip. This durability justifies the investment and means the set can travel with you between vehicles or last the lifetime of a single car's track career.

Combining Rack Stops With Other Steering Upgrades

Steering geometry is a system. Rack stops work alongside angle kits, camber plates, sway bar upgrades, and tie-rod extensions to create a complete steering package. If you're running a custom steering angle kit from SLRspeed for BMW, that kit likely already includes rack stops. If you're retrofitting stops onto an existing steering setup, they integrate seamlessly because they're mechanical and don't interfere with steering ratio, response, or power steering function.

For Corvette C5 and C6 owners, the Corvette (C5/C6) Quick Steer / Angle Kit is a natural pairing with universal rack stops. The angle kit gives you up to 45 degrees of lock from factory steering input (vs. 24 degrees stock), and rack stops let you dial that angle to exact clearance limits. Similarly, BMW owners running the BMW Mini Kit (Roll Center/Steering Quickening Angle Kit) benefit from adding or adjusting rack stops to match their specific wheel fitment and brake duct configuration.

The interaction between these components matters. An angle kit changes steering ratio but not maximum travel; rack stops limit travel but not ratio. Camber plates allow suspension articulation but can load the steering at extreme angles; rack stops smooth that load transition. Adjustable sway bars control body roll but can bind if steering angle is excessive; rack stops prevent that binding by limiting travel. Building a complete steering system means understanding how each component feeds into the others, and rack stops are a critical foundational piece that makes all the other upgrades work reliably.

Real-World Performance Gains and Track Day Outcomes

What does installing rack stops actually gain you at the track? Time is hard to predict because it depends on your baseline setup, your driving skill, and the specific course. However, the tangible outcomes are measurable: zero frame rub (where there was rub before), consistent steering response without worrying about mechanical stops failing, and improved confidence driving at full lock for extended periods. Many drivers report that knowing their steering geometry is dialed in lets them focus on lines and inputs rather than listening for contact sounds or worrying about tie-rod failure.

In endurance racing and long drift events, reliability benefits compound. A 6-hour race where you don't lose time to steering component failures is a 6-hour race where you're competitive. A drift battle series where your car stays reliable across 10+ qualifying runs means you make it to the main event fresher and more confident than competitors who've had steering issues and spent time troubleshooting. These aren't huge per-session time gains, but over a season or multi-year platform life, they add up to podiums and victories.

Common Questions and Misconceptions

One misconception is that rack stops reduce your effective steering angle or make steering feel sluggish. In reality, they only limit the extreme end of travel; steering response in the 0–45 degree range (where most driving happens) is completely unchanged. Another misconception is that you need to cut factory stops before installing rack stops. You don't; rack stops work independently and can coexist with factory stops as a safety backup. Some drivers ask if stops affect power steering pressure or feedback. They don't—the power steering system operates normally up to the stop point, then naturally resists further motion, just like a factory stop would.

A practical question many people ask: can I adjust stops myself mid-season? Yes, but it requires accessing the rack shaft, which means removing the wheel and possibly the inner fender. Most drivers do this adjustment during routine suspension service or at the shop. Some hardcore DIYers do it in the garage with basic tools. If you're planning multiple adjustments during a season (testing different wheel fitments or brake ducts), plan those changes as part of your track day prep, not during events.

Choosing the Right Stop Configuration for Your Build

Every car and setup is different, so there's no one-size-fits-all stop configuration. However, patterns emerge based on common builds. A street-driven drift car with moderately wide wheels (17 or 18-inch, 8.5-inch width, +5 to +15 offset) typically needs 2–3 stops per side to eliminate frame rub while preserving steering angle. A full-widebody drift car or a racing prototype with extreme offset might need 4–5 stops per side. A stock or mildly modified street car with factory-ish wheels might only need 1 stop per side as a safety measure against tie-rod shock loads.

The best approach is to install stops conservatively (start with 1–2 per side), test clearance under full lock, add stops incrementally until rub clears, then drive the car and confirm the setup feels natural. Some drivers install stops, then remove and reinstall them multiple times during the first season as wheel and suspension changes happen. Others find their ideal configuration early and keep it stable for years. There's no wrong answer; it depends on your build philosophy and how much you expect your car to change.

When ordering, remember that the Universal Steering Rack Stop Set comes with 8 stops total—typically 4 per side if you're balancing both steering directions equally. If your build is heavily skewed (like a car that only turns left tightly but has no right-turn constraints), you might use 6 stops on one side and 2 on the other, or even source additional stops from SLRspeed if needed. Contact their tech team for guidance on your specific platform.

The Long Game: Durability and Platform Longevity

Every component in a drift or race car wears out eventually. Tie-rods, power steering pumps, and steering racks are not exceptions. Proper rack stops extend the life of these components by reducing shock loads and protecting against damage during extreme steering angles. A car that runs 100+ track days with properly configured stops might wear out its tie-rods in 80+ track days. The same car without stops might see tie-rod failure at 40 days. Over a 5-year build lifespan, that's a real difference in maintenance costs and downtime.

Beyond component life, proper rack stops also support platform pride. A well-maintained drift car or race car where steering geometry is intentionally dialed in feels different to drive than one where steering has been hacked together or left to rub against frame. Engineers notice these details; judges at car shows and tech inspections notice them. Drivers of competing vehicles notice them too. Taking the time to get steering geometry right, including proper rack stops, signals that your build is professional and thought-through.

Looking to dial in your steering geometry or retrofit stops onto an existing platform? Explore the options available through SLRspeed's steering stop products and reach out to their tech support team at 561-877-3229 for fitment guidance specific to your vehicle. Whether you're building your first drift car, upgrading an endurance racer, or protecting a competition platform you've already invested in, rack stops are one of the simplest, most effective upgrades you can make. Let me know if you have questions about your specific setup.

Rack Shaft
The cylindrical shaft inside the steering rack that translates steering wheel input into left-right motion. Steering rack stops clip onto this shaft to control how far it travels in each direction before reaching mechanical end-of-travel.
Lock Limiters
Mechanical stops that clip onto a steering rack shaft to prevent the wheels from turning beyond a set angle. Used in drift and race cars to eliminate rubbing on frame or suspension while protecting tie-rods from power steering overload at full steering angle.
Power Steering Overload
Excessive hydraulic pressure in the steering system that occurs when the steering reaches mechanical end-of-travel and the pump continues pressurizing the fluid against a solid stop. This can bend tie-rods or blow seals; rack stops prevent it by absorbing travel before the pump reaches maximum pressure.
Tie-Rod
The metal rod connecting the steering rack to the wheel hub, transmitting steering commands to the wheels. Tie-rods are vulnerable to bending or failure when the steering hits a hard mechanical stop under load (such as during a bump at full lock), which rack stops help prevent by limiting travel smoothly.
Steering Angle
The maximum degree of rotation the front wheels can achieve from center. Most production cars max out around 35–45 degrees; drift and race cars with angle kits and rack stops can achieve 60–74+ degrees for sharper cornering and drifting.
Steering Setup: Factory Limits vs. Rack Stops
Area Factory Steering (No Stops) With Steering Rack Stops
Maximum Steering Angle Unlimited by mechanical stops until rubbing occurs or power steering fails. Dial-adjustable to 20–70+ degrees depending on stops clipped on, with factory stops as secondary limit.
Tie-Rod Protection Full power steering pressure loads hit tie-rod connection when wheels turn into bumps at lock, risking bending or failure. Rack-mounted stops absorb lock travel and remove pressure overload from tie-rod, preventing component damage during aggressive driving.
Frame & Brake Duct Rubbing Wide wheel combos and high offset cause rubbing on frame, sway bars, or brake ducts at full lock, forcing suspension compromise. Stops limit travel before rubbing point is reached, protecting brake system and frame while preserving steering response up to your set angle.
Installation Complexity Factory stops are fixed; repositioning requires trimming rack stops or modifying steering geometry permanently. Clip stops on and off with no tools; adjust angle incrementally by adding or removing stops until clearance and angle are perfect.
Adjustability Once cut or welded, factory stops cannot be changed without machine work; geometry is locked in. Stops are reusable and repositionable; swap set-ups between track configurations or vehicles without permanent modification.
Power Steering Load Pump pressurizes fully into the end-of-travel mechanical stop, creating shock load and heat in the steering circuit. Rack stops reduce power steering pressure buildup at full lock by limiting travel before factory stops are engaged, extending pump life.

How to Install Steering Rack Stops on Your Drift or Race Car

  1. 01 · Identify your rack shaft diameter. Measure the outer diameter of your steering rack shaft to confirm it falls within the 25-30mm range that the Universal Steering Rack Stop Set (Lock Limiters) supports. Most common drift and race cars in the supported vehicle list (Nissan, BMW, Toyota, Mazda, Corvette, etc.) will fit. Consult your vehicle's service manual or measure with calipers if unsure.
  2. 02 · Raise the vehicle and remove the wheel. Lift the car safely on jack stands and remove the driver's side front wheel to access the steering rack. This gives you clear working room to slide stops onto the rack shaft and test steering angle without obstruction. Leave the car on stands long enough to complete installation and full-lock testing.
  3. 03 · Clip the first stop onto the rack shaft. Slide the first stop clip onto the steering rack shaft at approximately the midpoint. The clip should sit snugly against the shaft without forcing it. Verify it rotates slightly on the shaft — it will ride along the threading as the rack moves. Do not tighten or glue it; the stops should move freely initially.
  4. 04 · Turn the wheel to full lock and check clearance. Rotate the steering wheel to full left lock and visually inspect for rubbing on frame, sway bars, brake ducts, or suspension components. If rubbing occurs, you'll need additional stops to limit travel further. If clearance is good, proceed to add a second stop on the opposite side of the shaft.
  5. 05 · Add stops to the opposite side symmetrically. Clip a second stop onto the right side of the rack shaft at approximately the same distance from center. Test full right lock the same way. Ideally, both sides should limit at the same point to maintain even steering geometry. Add stops to both sides simultaneously until you eliminate rubbing on both sides.
  6. 06 · Test both directions and dial in final position. Rotate the wheel slowly to full lock in both directions multiple times, checking for smooth movement and consistent clearance from all obstacles. The stops should feel firm but not like the steering is hitting a wall. Once dialed in, you can secure stops with a light dab of threadlocker if desired, though most drivers leave them free to adjust later.
  7. 07 · Check power steering pressure and response. Start the engine and turn the wheel to full lock in both directions while the engine is running. Listen for any unusual sounds from the power steering pump and feel the steering effort. Proper rack stops should feel like a smooth mechanical end-of-travel with no harsh metal-on-metal contact or pump whine.
Rack stops remove power steering overload from the tie-rod when you reach the limit, preventing failure when hitting bumps at full lock.

FAQ

What exactly do steering rack stops do?
Steering rack stops are mechanical limiters that clip onto your steering rack shaft and prevent the rack from traveling beyond your desired angle. They protect tie-rods from power steering overload, stop rubbing against frame and brake ducts, and prevent the steering from binding when you hit bumps at full lock. This is critical for drift cars running full lock constantly and race cars pushing suspension to extreme angles.
How many stops do I need to install?
The Universal Steering Rack Stop Set (Lock Limiters) comes with 8 stops. You clip them onto your rack shaft one at a time until you reach your desired steering angle limit. Most drivers start with 2-4 stops depending on their wheel fitment and track setup. You'll test and adjust by adding or removing stops until rubbing clears and steering angle is perfect.
Will steering rack stops work on my car?
The Universal Steering Rack Stop Set fits any steering rack with 25-30mm outer diameter shaft thickness. This covers all Nissan S-chassis, Z-series, R-series, and 370Z; all BMW E30, E36, E46, E90, and newer models; all Toyota, Mazda, Subaru models; Corvette C5 and C6; Cadillac XLR; and Lexus IS/SC vehicles. Check your specific model in the product description to confirm fit before ordering.
Do I need to modify my steering rack to install stops?
No. The beauty of rack-mounted stops is that they clip on without removing inner tie-rods or cutting factory stops. Simply slide them onto the shaft one at a time until your steering reaches the limit you want. Once you dial in your angle, you can then trim factory stops if needed for clearance, but the SLR stops do the work first.
Why does my race car need steering angle limiters?
Race cars with wide wheel and tire combos or high offset wheels often rub on frame, sway bars, or brake ducts at full lock. Limiters let you reduce maximum steering angle to eliminate rubbing without compromising the responsiveness of your steering ratio. They also protect your power steering system and tie-rods from shock loads when you hit a bump at full lock, which can bend tie-rods or strip steering components.
Can I use rack stops with an angle kit?
Yes. Steering rack stops work alongside angle kits (steering quickening kits) because they control physical travel, not steering ratio. An angle kit changes how much wheel angle you get per steering wheel input; rack stops prevent the rack from traveling beyond a safe distance. Many drift drivers combine both for maximum steering angle with perfect frame clearance.
Leave a comment

Your email address will not be published..

Cart 0

Your cart is currently empty.

Start Shopping