Skip to content
Wide Body Kit Guide: Overfenders, Wide Fenders and Full Widebody Kits Explained

Wide Body Kit Guide: Overfenders, Wide Fenders and Full Widebody Kits Explained

A wide body kit is the most dramatic change you can make to the look of a car. It widens the arches so you can run wider wheels, more aggressive offsets and a lower stance without the tires poking out. Wide body kits also cost more, take more work to fit and are harder to undo than a lip or a spoiler. This guide explains what a wide body kit is, the main types, what fitting one really involves, and the kits and flares we stock for popular cars.

Shop wide fenders and flares in our fender flares collection, or browse the full body kits collection.

What Is a Wide Body Kit?

A wide body kit (also written widebody kit) is a set of body panels that makes the car wider at the wheel arches. Most kits are built around fender flares or overfenders, and many also include matching bumpers, side skirts, a front lip, a rear diffuser or a spoiler so the extra width flows into the rest of the body. The point is to make room for wider wheels and tires, or a lower offset, while keeping the wheels covered.

Types of Wide Body Kits

Type How it fits Cutting needed? Good for
Bolt-on / riveted overfenders Flares bolt or rivet over the factory fender, often with exposed hardware Usually yes, the factory arch is cut or rolled to clear the tire Track and show cars, the classic "bolt-on wide body" look
Replacement wide fenders Swap the factory fenders and sometimes quarter panels for wider ones Front fenders often bolt on; rear quarters usually need bodywork A smoother, more factory look
Full wide body kit Flares or wide fenders plus matching bumpers, skirts, lip and diffuser Depends on the kit Complete builds where everything has to line up
Truck and Jeep fender flares Pocket-rivet or bolt-on flares over the factory arches Usually none Covering wider off-road tires and lifted trucks

For a deeper look at flares on their own, see our fender flares guide.

Wide Body Kit Materials: FRP vs Carbon Fiber vs Plastic

  • FRP (fiberglass). The most common material for wide body kits. It is affordable and easy to repair, but it arrives unpainted and needs prep, test fitting and paint.
  • Carbon fiber. Lighter and stiffer, and often left exposed with a clear finish. It costs more.
  • Textured plastic (ABS/PP). Common on truck and Jeep fender flares. It is flexible and usually ready to install without paint.

Wide Body Kits for Popular Cars

Toyota GT86 / Subaru BRZ (2012–2016)

Our GT86 ZN6 / BRZ ZD6 wide body kit is FRP and includes a front bumper, rear bumper, side skirts and a spoiler, so the whole car changes, not only the arches. For more GR86, BRZ and FR-S aero, see the GR86 / BRZ / FR-S body kits collection and our GR86 / BRZ body kit guide.

Dodge Challenger (2015–2023)

The Challenger widebody fender flares are carbon fiber with a high-polished finish, made for 2015–2023 cars.

Mazda Miata NA (1989–1997)

The NA Miata is one of the most popular cars to widen. Start with the NA Miata four-piece FRP fender flare kit, then finish the front with the NA Miata wide-body front lip / under diffuser. More options are in the Miata body kits collection.

Honda S2000 (AP1 / AP2)

For S2000s that are already widened, the S2000 wide body rear diffuser is an FRP lower rear bumper piece made for a wide body setup.

Trucks and Jeeps

We also stock pocket-rivet and bolt-on fender flares for trucks and Jeeps, including the 2021–2022 Ford F-150, 2009–2018 Ram 1500 and 2007–2018 Jeep Wrangler JK (with LED side markers). Check the years, cab and trim in each listing.

What Fitting a Wide Body Kit Involves

  1. Plan wheels and suspension first. Pick wheel width, offset and ride height before you buy the kit, so the flares actually cover the tire.
  2. Test fit everything. Fit every panel before paint. Aftermarket FRP parts commonly need trimming, sanding or shimming.
  3. Cut or roll the arches if needed. Overfender kits often need the factory arch cut so the tire can move up into the flare.
  4. Prep and paint. Unpainted FRP needs sanding, primer and paint.
  5. Final mounting. Bolt, rivet or bond the panels as the kit is designed. Professional installation is recommended for cut-and-bolt kits.
  6. Set alignment last. Wider wheels and lower offsets usually need an alignment, and many builds add wheel spacers to fill the new arches.

Wide Body Kit FAQ

How much wider does a wide body kit make a car?

It depends on the kit. Check the listing or manufacturer for the added width per side and plan your wheel offset from that.

Do you have to cut the car for a wide body kit?

Many bolt-on overfender kits require cutting the factory arch. Replacement fenders and most truck flares do not.

Is a wide body kit reversible?

Kits that bolt over the factory fenders are only reversible if you did not cut the arches. Once the metal is cut, going back means replacing panels.

Do wide body kits come painted?

FRP kits usually arrive unpainted and need prep and paint. Carbon fiber parts often have a clear finish, and truck flares are usually textured black.

What is the difference between a body kit and a wide body kit?

A standard body kit changes the bumpers, skirts and spoiler but keeps the factory width. A wide body kit adds width at the arches.

Ready to go wide? Start with the fender flares collection or the full body kits collection.

Leave a comment

Your email address will not be published..

Cart 1