The Mazda RX-7 has long been a favorite among drifting and racing enthusiasts. The second-generation RX-7, known as the FC, continues to captivate with its potential for performance upgrades. One of the most impactful upgrades you can make is the Mazda RX-7 Mini-Kit Angle (FC), a steering kit designed by SLRspeed to enhance your vehicle's drifting capabilities.
Mazda RX-7 Mini-Kit Angle (FC) offers a 100% bolt-on solution that dramatically increases the steering angle, allowing for up to 60 degrees. This kit is engineered for the Series 4 Mazda RX-7, providing increased track width by 100mm overall, ensuring ample wheel and tire clearance during aggressive maneuvers.
The heart of this kit lies in its high-quality construction. Made from billet 7075 aluminum, the components are anodized for lasting protection. The inclusion of high-quality bearings and rod ends, along with CAD plated ball-joint studs, ensures durability while maintaining the kit's lightweight nature. This construction not only extends the life of the components but also enhances the overall performance of the RX-7.
Enhanced Steering Control
One of the major benefits of the Mazda RX-7 Mini-Kit Angle (FC) is its ability to provide a 40% quicker steering ratio compared to the factory setup. This improvement is crucial for drivers who need rapid response during competitive drifting events. The steering enhancements allow drivers to execute tight turns and maintain control even in the most challenging situations.
The kit’s design includes four-position Ackerman adjustment, providing flexibility to tune the steering geometry based on track conditions and personal driving style. This feature is particularly valuable for professional drivers who participate in diverse racing environments. Whether you're on a tight technical track or a high-speed course, this adjustment capability ensures that your RX-7 is always optimized for performance.
Installation Simplicity
Installing the Mazda RX-7 Mini-Kit Angle (FC) is straightforward, thanks to its bolt-on design. Compatible with Series 4 ('85-'88) front control arms, the kit replaces the bolt-on front ball joint, simplifying the upgrade process. All necessary hardware is included, making it convenient for both seasoned mechanics and DIY enthusiasts.
While the installation is designed to be simple, following the provided instructions carefully is essential to ensure all components are correctly fitted and adjusted. Proper installation guarantees the best performance outcomes and longevity of the kit components.
Improved Drifting Performance
Drifting requires precision and control, and the Mazda RX-7 Mini-Kit Angle (FC) delivers on both fronts. By increasing the track width and steering angle, this kit provides the necessary stability and control for executing perfect drifts. The bump steer correction further enhances this stability, minimizing unwanted steering changes during suspension movement.
For competitive drifters, this kit offers a significant advantage. With improved handling and responsiveness, drivers can push their RX-7s to the limits, achieving better drift angles and maintaining smoother transitions between corners. The increased steering capabilities make it easier to control the car at high speeds, a crucial factor in competitive drifting.
Durability and Quality
Constructed in the USA, the Mazda RX-7 Mini-Kit Angle (FC) boasts high-quality materials and craftsmanship. The use of billet 7075 aluminum is a testament to the kit's durability, providing the strength needed for demanding racing conditions while keeping weight to a minimum.
Each component is designed to withstand the stresses of racing, with anodized finishes protecting against wear and corrosion. The inclusion of premium bearings and rod ends ensures that the kit remains reliable under pressure, maintaining performance consistency over time.
Conclusion
In summary, the Mazda RX-7 Mini-Kit Angle (FC) by SLRspeed is a must-have for RX-7 owners looking to enhance their vehicle's drifting and racing capabilities. With its bolt-on installation, high-quality construction, and significant performance benefits, this kit stands out as a top choice for enthusiasts and professional racers alike. Explore this innovative solution and take your drifting experience to the next level.
| Area | Stock Steering | Mini-Kit Angle (FC) |
|---|---|---|
| Steering Angle | Limited to factory settings. | Up to 60°, track dependent. |
| Track Width | Standard width. | Increased by 100mm overall. |
| Steering Ratio | Standard factory ratio. | 40% quicker steering response. |
| Installation | Factory setup. | 100% bolt-on for S4 control arms. |
| Material Quality | Factory materials. | High-quality billet 7075 aluminum. |
How to Install the Mazda RX-7 Mini-Kit Angle (FC)
- 01 · Gather necessary tools. Ensure you have all the required tools such as wrenches, a jack, and safety stands before starting the installation.
- 02 · Prepare your vehicle. Safely lift the Mazda RX-7 and secure it on stands. Remove the wheels to access the steering components.
- 03 · Install control arm extensions. Attach the bolt-on double sheer control arm extensions to increase track width by 50mm per side.
- 04 · Adjust tie rod ends. Fit the bump steer corrected outer tie rod end and billet aluminum tie rod extension tubes to the factory style inners.
- 05 · Final adjustments and testing. Adjust the four-position Ackerman and verify all components are secure. Test the steering to ensure proper installation.
The Mazda RX-7 Mini-Kit Angle (FC) revolutionizes drifting with up to 60° of steering angle.
