A Honda Civic body kit is rarely one big box of parts. Most owners build it piece by piece: a front lip, side skirts, a rear lip or diffuser, and a trunk spoiler or wing. The catch is that every Civic generation, and often every body style inside it, uses different bumpers. This guide breaks down what fits by generation so you buy the right part the first time.
Browse everything in our body kits, hoods and trunks collection, or jump to the generation you drive below.
How to Pick a Honda Civic Body Kit
- Confirm generation and body style. A sedan, coupe, hatchback, Si and Type R often have different bumpers, so a lip for one may not fit another.
- Pick the material. ABS and PP plastics are lighter on the wallet and flex a little, PU (polyurethane) is the most forgiving if you scrape a driveway, and carbon fiber or carbon-look finishes are mostly about appearance.
- Decide painted or unpainted. Unpainted parts need prep and paint to match. Gloss black and carbon-look parts can usually go straight on.
- Test fit before you paint or drill. Always hold the part up to the car first.
11th Gen Honda Civic Body Kit (2022+)
The 11th gen Civic comes as a sedan, a hatchback and the FL5 Type R, and the rear ends are different, so match the part to your body style.
- 2022-2023 Civic 11th Gen sedan high kick trunk spoiler in gloss black ABS, listed as a no-drilling install.
- 11th Gen Civic Hatchback rear bumper lip in glossy black or carbon fiber look, which adds a lower edge to the factory rear bumper.
- 2022-2023 Civic 4-door MD style front lip splitter (2-piece PP) for the sedan front end.
- FL5 Type R: the FL5 high-position rear wing risers raise the factory wing 85 mm (3.35 in) and let you adjust its angle, made from 6061-T6 aluminum.
10th Gen Honda Civic Body Kit (2016-2021)
The 10th gen has the deepest aftermarket of any Civic. The base sedan and coupe, the Si, the FK7 hatchback and the FK8 Type R all use different front and rear bumpers.
- 2016-2021 Civic Si and FK7 hatchback front lip splitter in ABS, glossy black or carbon fiber look.
- FK8 Type R single-deck side skirts, injection-molded black ABS that mounts with the supplied screws.
- 2017-2021 Civic Hatchback Type R rear bumper lip kit (PP).
- For base sedans and coupes, look for parts labeled for the non-Si bumper, such as IKON, CS and Modulo style front lips and sedan side skirts in the body kit collection.
8th Gen Honda Civic Body Kit (2006-2011)
The 8th gen sedan and coupe have different rear bumpers, and the high-performance FD2 and FN2 models are different again.
- 2006-2011 Civic 8th Gen sedan rear diffuser with LED brake light, carbon fiber look ABS with a built-in red LED third brake light. It is listed for the 4-door sedan and does not fit the FD2 or FN2.
EG and EK Civic Body Kits (1992-2000)
Older Civics are still a favorite for clean, period-correct lips. Front lips for the 1996-1998 EK, such as the EK CTR style front lip and the EK OEM Si style front lip, are made from PU, which handles curbs and driveways better than rigid plastic. Note that 1999-2000 EK Civics use a different front bumper than 1996-1998.
Civic Wide Body Kit vs. Bolt-On Lip Kit
A wide body kit adds fender flares and usually needs cutting, wider wheels and paint. A lip kit (front lip, side skirts, rear lip or diffuser) bolts on with no cutting and can be done in a weekend. For most street Civics, a lip kit plus a spoiler gives the biggest visual change for the money. See our wide body kit guide if you are planning the full build.
More Civic Styling Guides
- Front lip vs. splitter: what is the difference?
- Side skirts guide
- What does a rear diffuser do?
- Ducktail vs. wing rear spoiler
- Honda Civic headlights and tail lights by generation
Honda Civic Body Kit FAQ
Will a 10th gen Civic sedan lip fit the Si or Type R?
Usually not. The Si, hatchback and Type R use different front bumpers than the base sedan and coupe, so buy a lip listed for your exact model.
What is the best material for a Civic front lip?
PU flexes and survives scrapes best, ABS and PP are light and affordable, and carbon fiber is mainly for looks. On a lowered Civic, PU or ABS is the practical choice.
Do I need to paint a Civic body kit?
Unpainted parts need paint. Gloss black and carbon fiber look parts can be installed as they come.
Do Civic trunk spoilers need drilling?
It depends on the part. Some, like the 11th gen sedan high kick spoiler above, are listed as no-drilling installs. Check the product listing before you buy.
Is a wide body kit worth it on a Civic?
Only if you plan wider wheels and paint work. For a street car, a bolt-on lip kit and spoiler gives most of the look with no cutting.