Trunk Tailgate Applique for Tesla Model Y Juniper - Real Dry Molded Carbon Fiber

$309.00 $245.00 Save $64.00
Shipping calculated at checkout.
Carbon Fiber Finish: Glossy Carbon Fiber
Tesla Letters: No
Exclusive for 2025+ Model Y Juniper

Elevate Model Y Juniper's Rear Aesthetic

Transform the refreshed 2025+ Model Y with our Real Dry Carbon Fiber Lower Taillight Applique. Designed to install seamlessly over the factory mesh-textured surface beneath the taillight, it delivers a distinctive, performance-inspired OEM+ look.

100% Real Dry Carbon Fiber

Authentic molded carbon fiber. Never hydro-dipped, never plastic-wrapped. Pure motorsport quality.

OEM+ Precision Fit

Meticulously 3D-scanned to perfectly contour to the Juniper’s specific recessed lines and taillight curvature.

Advanced UV Protection

Treated with a high-grade UV-resistant clear coat to prevent fading, yellowing, and weather damage.

5-Min DIY Installation

Pre-applied automotive-grade 3M adhesive. No drilling, no tools, completely reversible process.

Dual Premium Finishes

Match your Model Y's existing styling perfectly. We offer two distinct, hand-polished finish options:

  • Glossy "Wet Look": A deep, highly reflective sheen that makes the carbon weave pop, matching factory performance spoilers.
  • Matte "Dry Carbon": A sophisticated, understated, race-inspired aesthetic that resists fingerprints and glare.

OEM-Look Optional Lettering

Personalize your trunk tailgate even further. Choose to keep the clean, minimalist carbon canvas, or apply our included custom letters.

Available Options: Red, Silver, or Matte Black lettering. (Available in high-quality vinyl decals or raised, OEM-style stick-on emblems). The applique is perfectly designed to fit effortlessly over the factory Tesla lettering if you choose to keep it.

Discover More About Our Tesla Letters Emblem

What's Included in the Box

  • 1x Real Carbon Fiber Lower Taillight Applique
  • 1x Set of Optional Tesla Lettering (Color of your choice)
  • Pre-applied Automotive-Grade 3M Double-Sided Tape
  • Alcohol Prep Pads for surface cleaning
Compatibility: Tesla Model Y Juniper (2025+) only. Not designed for the pre-refresh Model Y.

Installation Guide

Prep: Install in temps between 15-30°C (59-86°F) for optimal adhesive performance.

  • Clean the Surface: Wipe the taillight area thoroughly with isopropyl alcohol. Ensure it is completely dry and free of wax.
  • Test Fit (Crucial): Position the applique without removing the adhesive backing to ensure proper alignment.
  • Heat Activation: Use a hair dryer to gently heat the 3M tape for 30 seconds (do not exceed 40°C/104°F).
  • Apply & Press: Remove the backing, position carefully, and press firmly for 60 seconds across the entire surface.
  • Cure Time: Allow 48-72 hours for the adhesive to fully bond before driving at highway speeds. Avoid washing the car for the first 7 days.

Care & Maintenance

Keep your carbon fiber looking pristine for years to come.

  • Clean with pH-neutral car soap and a soft microfiber cloth.
  • Apply a Ceramic Coating every 6 months for maximum UV defense.
  • Safe for automated car washes (only after the 7-day initial cure period).
  • Avoid pointing high-pressure washers directly at the applique edges.

Frequently Asked Questions

Will this damage my original paint or factory letters?
No. We use automotive-grade 3M VHB tape that holds securely against weather and high speeds, but can be safely removed later with gentle heat and fishing line. It leaves your original paint and factory lettering completely intact and undamaged.
Can I take my car to an automatic car wash?
Yes! Once installed properly, the applique is fully car wash safe. However, we strongly recommend waiting at least 7 days after installation before any wash — especially before a high-pressure automatic car wash.
Does it interfere with the Juniper's new rear light bar?
Absolutely not. This applique is 3D-scanned and precision-cut specifically for the 2025+ Juniper. It is designed to sit perfectly flush over the lower mesh area beneath the taillight housing, without obstructing any illumination or sensors.
Quality Guarantee & Return Policy: Minor pattern variations are normal in authentic 100% dry molded carbon fiber and demonstrate genuine craftsmanship. Backed by our 1-Year UV Protection Warranty.

Note: Products are considered "used" and non-returnable once the adhesive backing is removed. Please strictly follow the test-fit step before final installation.

Products received may vary slightly from images due to manufacturing tolerances or supply chain variables.

International Orders (Outside USA)

Please be aware your country may charge import fees of up to 20% in some cases. If delivery is refused, return shipping costs us 4x the original shipping fee, so we will charge a 50% restocking fee. By purchasing you agree to these terms.
Terms of Service:

By clicking purchase, you confirm you have read and agree to the TOS and Shipping & Return policies which are published at the bottom of SLRspeed.com
Carbon Fiber Finish: Glossy Carbon Fiber
Tesla Letters: No

The Premium Suspension Company

Trusted by top racing and drifting teams worldwide.