MaXpeedingrods Universal Weld-On Rear 4-Link Kit, 24 In DOM Steel Bars, Panhard Bar, Air Ride Trucks

This universal weld-on rear 4-link kit lets you build a rear suspension for an air ride truck, hot rod or classic car. Four 24 inch DOM steel bars locate the axle, a 24 inch panhard bar controls side-to-side movement, and adjustable rod ends with urethane bushings let you set pinion angle and axle position. It suits builders who fabricate their own mounts and want a complete set of brackets in one box.

Key features

• Four heavy duty 24 inch DOM steel link bars
• Adjustable zinc plated rod ends with urethane bushings
• 24 inch panhard bar with weld-on axle and frame mounts
• Weld-on axle, frame and center link axle mounts
• Blue finish

Specs

• Bar tubing: DOM steel, 1.25 in outside diameter, 0.156 in wall
• Bar length: 24.00 in center to center, fully adjusted in
• Panhard bar length: 24.00 in
• Rod ends: zinc plated steel with urethane bushings
• Placement: rear, left and right

Fitment

Universal kit for custom trucks, rods and classic cars running air ride suspension. It is not vehicle-specific, so measure your chassis and axle before ordering. Check your year, trim and model against the list above before ordering.

What's included

• 4x heavy duty 24 in steel bars
• 4x zinc plated steel rod ends with urethane bushings
• 2x steel weld-on axle mounts
• 2x steel weld-on frame mounts
• 4x steel weld-on center link axle mounts
• 10x hex head bolts with nyloc nuts
• 1x 24 in panhard bar with 1 weld-on axle mount and 2 weld-on frame mounts

Install notes

All mounts are weld-on, so fabrication and welding are required. No manual is included and professional installation is recommended.

Products received may vary slightly from images due to manufacturing tolerances or supply chain variables.