Edelbrock SBC 18 Degree 4500 Manifold

$686.25
Shipping calculated at checkout.

Glidden Victor Intake Manifold for SBC 15°/18° Heads 4500

Edelbrock Part # 2859 Victor Glidden intake manifold is for all-out nitrous-assisted drag race applications. Designed with noted drag racer Billy Glidden, it features intake runners with a large cross-section area of 3.2 square-inches for maximum high-end horsepower in engines operating from 5000 to 8500 rpm with GM or Edelbrock 18-degree heads. Carb mount flange and plenum are machined for 4500 Series carburetors and require port matching and blending prior to use. The Edelbrock Victor Glidden is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds.

SPECS

Application Universal
Installation Notes
  • Recommended intake gasket: Edelbrock # 7218 or Fel-Pro # 1282
  • Carb Pad Height: 7.03?
  • For use with 15 and 18 Degree Chevy with 4500 Series Carburetor.
  • Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
  • Optimum cylinder head port opening size should be as close as possible to the size of the gasket being used.
  • Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
  • Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
  • NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
  • Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Center Maximum Height 7.030 in
Color Satin
Front Maximum Height 7.030 in
Material Aluminum
Rear Maximum Height 7.030 in
Single Or Dual Plane Type Single Plane

Products received may vary slightly from images due to manufacturing tolerances or supply chain variables.

International Orders (Outside USA)

Please be aware your country may charge import fees of up to 20% in some cases. If delivery is refused, return shipping costs us 4x the original shipping fee, so we will charge a 50% restocking fee. By purchasing you agree to these terms.
Terms of Service:

By clicking purchase, you confirm you have read and agree to the TOS and Shipping & Return policies which are published at the bottom of SLRspeed.com

The Premium Suspension Company

Trusted by top racing and drifting teams worldwide.