2015–2018 Audi A6 S-Line / S6 C7 Sedan A Style Front Bumper Canard Fins – Carbon Fiber

2015–2018 Audi A6 S-Line / S6 C7 Sedan A Style Front Bumper Canard Fins – Carbon Fiber

Add a sharp, track-inspired detail to the front bumper of your Audi A6 C7 S-Line or S6 Sedan with these carbon fiber canard fins. Supplied as a handed pair in a clean A-style profile, they sit at the lower front corners to visually widen the front stance and give the car a more aggressive, performance-focused forward presence.

Build

• Material: Genuine carbon fiber, autoclave cured using a 3D design and CNC moulding process for precise fin geometry, consistent panel quality, and an authentic weave appearance over carbon-look ABS or fiberglass alternatives
• Surface finish: High-gloss epoxy-polished top coat that holds its deep carbon appearance through sustained outdoor and driving exposure without fading or yellowing
• Configuration: Supplied as a handed pair (left and right) for a symmetrical installation across both lower front corners
• Weight: Lightweight at approximately 0.2 kg for the complete set

Design & Finish

• A-style canard profile: Clean, track-inspired fins at the lower front corners for a distinctly motorsport-derived look
• Aggressive stance: Visually widens the front end for a more purposeful, performance-focused forward presence
• Carbon aesthetic: Directional weave and gloss finish complement the sporty S-Line and S6 bodywork for a coordinated, motorsport-grade look

Fitment

• 2015–2018 Audi A6 S-Line Sedan (C7, 4-door)
• 2015–2018 Audi S6 Sedan (C7, 4-door)
• Fits the A6 S-Line and S6 factory front bumper only — not compatible with the standard non-S-Line A6, aftermarket bumpers, or non-C7 configurations
• Body style: Sedan (4-door) only — not confirmed for Avant or Allroad variants

Package Contents

• 2 × carbon fiber front bumper canard fins (left and right)
• Pre-applied adhesive tape for installation

Installation

• No-drill, adhesive-mounted: Installs with the included adhesive tape — no drilling and no permanent modification to the factory front bumper
• Surface prep: Thoroughly clean, degrease, and dry the bumper at each canard position before fitting to ensure maximum adhesion
• Check orientation: The fins are handed — confirm correct left and right sides before final adhesion
• Professional installation recommended for the best positioning, symmetrical alignment, and finish

Before You Install

• Confirm your car is an A6 S-Line or S6 C7 Sedan (2015–2018) before ordering — this will not fit the standard non-S-Line A6
• Dry-fit both fins and measure from a fixed reference point on each side before adhesion — symmetry is highly visible on paired front-corner parts
• Canards sit low on the bumper and are exposed to road debris and kerbs — take care when parking nose-in
• Installation is reversible, but adhesive removal and re-prep may be required if pieces need repositioning

Products received may vary slightly from images due to manufacturing tolerances or supply chain variables.