2012–2016 Audi A5 S-Line / S5 B8.5 Facelift Front Bumper Lip Splitter – Carbon Fiber

2012–2016 Audi A5 S-Line / S5 B8.5 Facelift Front Bumper Lip Splitter – Carbon Fiber

Sharpen the front-end stance of your Audi A5 S-Line or S5 B8.5 Facelift with this carbon fiber front bumper lip splitter. Finished in a 3K twill weave with a high-gloss clear coat, it extends the lower bumper profile forward for a more aggressive, ground-hugging forward presence.

Build

• Material: Genuine carbon fiber in a 3K twill weave, autoclave moulded using a 3D design and CNC moulding process for consistent panel quality and an authentic weave appearance
• Surface finish: Carbon black with a UV-protected clear coating that holds its high-gloss finish and resists yellowing through sustained outdoor and driving exposure
• Manufacturing: Vacuum moulding process for a lighter, more durable finished component than standard carbon parts
• Precision: Moulded from 1:1 scan data of the factory bumper and test-fitted on vehicles for accurate panel geometry

Design & Finish

• Aggressive stance: Splitter profile extends the lower bumper forward to visually lower the front end for a more track-inspired forward presence
• Carbon aesthetic: 3K twill weave and gloss black finish complement the sporty S-Line and S5 bodywork for a coordinated, motorsport-grade look
• Factory-style integration: Precision-molded to follow the contours of the factory front bumper for a clean, seamless fit

Fitment

• 2012–2016 Audi A5 S-Line (B8.5 Facelift)
• 2012–2016 Audi S5 (B8.5 Facelift)
• Facelift B8.5 only — does not fit pre-facelift B8 models, which use a different front bumper
• Fits the A5 S-Line and S5 factory front bumper only — not compatible with the standard non-S-Line A5 or aftermarket bumper configurations

Package Contents

• 1 × carbon fiber front bumper lip splitter
• Adhesive tape for installation
• Mounting screws for installation

Installation

• Add-on fitment, two mounting options: Fits over the factory bumper using the included adhesive tape for a reversible install, or screws for a more permanent, secure fitment
• Surface prep: If using adhesive tape, thoroughly clean, degrease, and dry the front bumper before fitting to ensure maximum adhesion
• Alignment: Dry-fit and centre the lip across the bumper, checking symmetry on both sides before committing to either method
• Professional installation recommended for correct positioning, panel-gap consistency, and finish — particularly if using the screw-mount option

Before You Install

• Confirm your car is the B8.5 facelift, not the pre-facelift B8 — check your build date if you are unsure, as the front bumpers differ
• Verify your bumper shape against the product images before ordering, and confirm your car is S-Line or S5 trim
• Screw mounting is permanent — it requires drilling, so decide on your method and confirm placement before starting
• Front splitters sit low and are exposed to kerbs, driveway ramps, and road debris — take care when parking nose-in

Products received may vary slightly from images due to manufacturing tolerances or supply chain variables.