Skip to content
Tundra Headlights and Tail Lights by Generation: 2000–2006, 2007–2013, 2014–2021 and 2022+ Fitment Guide

Tundra Headlights and Tail Lights by Generation: 2000–2006, 2007–2013, 2014–2021 and 2022+ Fitment Guide

The Toyota Tundra has been sold in the US since the 2000 model year, and its lights are one of the most common things owners replace: headlight lenses haze and yellow, tail light housings crack, and the factory halogen bulbs look dated next to newer LED trucks. The catch is that Tundra headlights and tail lights changed shape between generations and again at the 2014 facelift, so a lamp listed for one year range will not bolt onto another. This guide breaks down Tundra lighting by generation and shows how to choose the right replacement or upgrade.

Browse every lamp we carry in our headlights collection and tail lights collection.

Tundra Headlights and Tail Lights: Find Your Generation First

Start with your model year. Tundra lamp listings on SLR are titled by year range, and that range is the most important fitment detail on the page.

  • 1st gen (2000–2006): the first-generation Tundra. Lamps differ between Regular/Access Cab and Double Cab bodies, so check the cab style in the listing.
  • 2nd gen, pre-facelift (2007–2013): the larger truck with the rounded front end. Many 2007–2013 headlights share fitment with the 2008–2017 Sequoia.
  • 2nd gen, facelift (2014–2021): new front end, hood, grille, headlights and tail lights. 2007–2013 lamps do not fit.
  • 3rd gen (2022 and newer): all-new truck with different lamp shapes and connectors again.

Best Tundra Headlights by Generation

2007–2013 Tundra Headlights

Pre-facelift trucks came with reflector halogen headlights from the factory, and these are the housings that most often show yellowed lenses. LED projector assemblies are a direct swap that replaces the whole housing:

2014–2021 Tundra Headlights

The facelift trucks are the most popular Tundra for lighting upgrades. You can go OE-style or step up to full LED projectors:

Pair new headlights with replacement clear-lens fog lights for the 2014–2021 Tundra so the front end matches.

Best Tundra Tail Lights by Generation

2000–2006 Tundra Tail Lights

For first-gen trucks, OE-style replacements are the usual fix for cracked or faded lenses: halogen tail lamps for the 2000–2006 Tundra Access Cab.

2007–2013 Tundra Tail Lights

LED tail lights for the 2007–2013 Tundra add a dynamic (sweeping) turn signal and a full LED look. For the third brake light, the LED high-mounted brake light for 2007–2018 Tundra covers both pre-facelift and facelift trucks.

2014–2021 Tundra Tail Lights

2022+ Tundra Tail Lights

Third-gen owners can replace damaged lamps with tail light assemblies for the 2022–2024 Tundra (US version) or the 2022–2024 Tundra LED rear tail light (OE part 81550-0C130).

LED vs Halogen vs Sequential: Which Tundra Upgrade Is Right?

OE-style replacements are the simplest choice when a lamp is cracked, fogged or damaged and you want the truck to look stock. LED projector headlights give a sharper cutoff and a whiter beam than reflector halogens, and the housing replacement fixes yellowed lenses at the same time. Sequential and dynamic turn signals sweep outward instead of blinking, a popular look on Tundras and other trucks. For a deeper comparison, read projector vs LED headlights and sequential tail lights.

Want a darker rear end without new lamps? See our guide to tail light tint vs smoked tail lights.

How to Install Tundra Headlights and Tail Lights

  • Tail lights on the Tundra are held by bolts accessed with the tailgate open, then the lamp pulls rearward off its clips and unplugs. Most owners swap a pair in well under an hour.
  • Headlights require removing the grille on most model years to reach the upper mounting bolts. Take your time with the grille clips, they get brittle with age.
  • Check connectors before you start. Assemblies that bolt in with factory plugs are noted in each listing; some LED tail lights may need a load resistor or decoder to avoid hyper-flash.
  • Aim the headlights after installing new housings so you don't blind oncoming traffic.

Shopping for another truck? Our aftermarket truck headlights guide for Tacoma, F-150 and Ram 1500 and 4Runner headlights and tail lights by generation cover the same questions for those models.

Tundra Headlights and Tail Lights FAQ

Do 2007–2013 Tundra headlights fit a 2014 Tundra?

No. The 2014 facelift changed the front end, so 2007–2013 headlights do not fit 2014–2021 trucks. Always match the year range in the listing.

Do Tundra headlights fit the Sequoia?

Some do. Several 2007–2013 Tundra headlight assemblies are also listed for the 2008–2017 Sequoia. Check the listing title before you buy.

Are LED tail lights plug-and-play on a Tundra?

Many are designed to use the factory plugs, but some LED lamps can cause fast blinking (hyper-flash) because they draw less current. A load resistor or decoder fixes it if needed.

What headlights fit a 2014–2021 Tundra?

Any headlight assembly listed for 2014–2021. On SLR that includes LED projector assemblies and OE-style black housings with amber corners.

Can I replace just one Tundra tail light?

Yes, OE-style lamps are often sold as a single side. Aftermarket LED and sequential designs are sold as pairs so both sides match.

Leave a comment

Your email address will not be published..

Cart 1