{"product_id":"edelbrock-rollin-thunder-camshaft-hydraulic-roller-for-1991-later-gen-v","title":"Edelbrock Rollin' Thunder Camshaft; Hydraulic Roller For 1991 \u0026 Later Gen V","description":"\u003cp\u003eRollin' Thunder camshaft #2264 is designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.\u003c\/p\u003e\u003cp\u003e Make sure the vehicle is on level ground and supported properly. Drain engine oil and coolant, storing them inappropriate containers or disposing of them properly\u003c\/p\u003e\u003cp\u003e After getting access to the front of the engine, remove the serpentine accessory drive belt\u003c\/p\u003e\u003cp\u003e Remove the water pump\u003c\/p\u003e\u003cp\u003e Remove the distributor\u003c\/p\u003e\u003cp\u003e Loosen the oil pan bolts enough to pull the oil pan away from the engine slightly to provide clearance for removing the timing cover\u003c\/p\u003e\u003cp\u003e Remove the intake manifold and the oil pump drive shaft bolt and assembly\u003c\/p\u003e\u003cp\u003e Remove the valve covers, remove the rocker arm nuts and pivot balls.\u003c\/p\u003e\u003cp\u003e Rotate the engine so that the timing marks on the timing chain are in line\u003c\/p\u003e\u003cp\u003e Remove the camshaft retaining plate and carefully remove the camshaft\u003c\/p\u003e\u003cp\u003e There is a pin that puts the distributor in proper time that is inserted into the camshaft\u003c\/p\u003e\u003cp\u003e Liberally coat the new Performer-Plus camshaft journals and lobes with clean engine oil\u003c\/p\u003e\u003cp\u003e Replace the camshaft retaining plate and tighten the bolts to the factory specification\u003c\/p\u003e\u003cp\u003e Replace the timing chain and camshaft sprocket\u003c\/p\u003e\u003cp\u003e Coat the lifters with clean engine oil\u003c\/p\u003e\u003cp\u003e Install the pushrods and rocker arms\u003c\/p\u003e\u003cp\u003e Install the valve covers\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECS\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication\u003c\/th\u003e\n\u003ctd data-th=\"Application\"\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAdvertised Exhaust Duration\u003c\/th\u003e\n\u003ctd data-th=\"Advertised Exhaust Duration\"\u003e315 deg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAdvertised Intake Duration\u003c\/th\u003e\n\u003ctd data-th=\"Advertised Intake Duration\"\u003e308 deg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCam Type\u003c\/th\u003e\n\u003ctd data-th=\"Cam Type\"\u003eRoller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExhaust Duration at .050 inch Lift\u003c\/th\u003e\n\u003ctd data-th=\"Exhaust Duration at .050 inch Lift\"\u003e256 deg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExhaust Valve Lift\u003c\/th\u003e\n\u003ctd data-th=\"Exhaust Valve Lift\"\u003e0.381 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIntake Duration at .050 Inch Lift\u003c\/th\u003e\n\u003ctd data-th=\"Intake Duration at .050 Inch Lift\"\u003e248 deg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIntake Valve Lift\u003c\/th\u003e\n\u003ctd data-th=\"Intake Valve Lift\"\u003e0.368 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIntake Valve Lift with Factory Rocker Arm Ratio\u003c\/th\u003e\n\u003ctd data-th=\"Intake Valve Lift with Factory Rocker Arm Ratio\"\u003e0.632 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLifter Type\u003c\/th\u003e\n\u003ctd data-th=\"Lifter Type\"\u003eRoller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLobe Separation\u003c\/th\u003e\n\u003ctd data-th=\"Lobe Separation\"\u003e112 deg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"FR SPORT","offers":[{"title":"Default Title","offer_id":67921762943070,"sku":"012KH","price":550.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0232\/4721\/files\/057e56ab3424d2d08538444c67a6206c.jpg?v=1793749624","url":"https:\/\/slrspeed.com\/products\/edelbrock-rollin-thunder-camshaft-hydraulic-roller-for-1991-later-gen-v","provider":"SLRspeed","version":"1.0","type":"link"}